top of page

Raw materials

Discover the properties, chemical composition, environmental impact, and sustainability value of the raw materials used in our production.

Fly Ash

Fly Ash

Blast Furnace Slag

Blast Furnace Slag

Silica Fume

Silica Fume

Calcite

Calcite

FLY ASH

Fly ash is a fine-grained waste material generated during the high-temperature combustion of finely ground coal in coal-fired thermal power plants; it is carried along by flue gases and subsequently captured using electrostatic precipitators.

​

Environmental Impacts and Applications

Flue Gas Treatment (Desulfurization): It is used to capture harmful gases—such as sulfur dioxide (SO₂) and hydrochloric acid—emitted from the chimneys of thermal power plants and industrial facilities, which are known to cause acid rain.

Wastewater and Sludge Treatment: It removes heavy metals (such as lead, mercury, cadmium, etc.) from industrial wastewater through precipitation and eliminates pathogenic microorganisms.

Remediation of Acidic Soil and Lakes: It is applied to restore the pH balance of lakes and agricultural lands that have become acidified due to acid rain or mining activities.

Carbon Capture: By binding atmospheric carbon dioxide (CO₂) and converting it into calcium carbonate, it contributes to the long-term sequestration of carbon from the atmosphere.

​

When released into the environment in an uncontrolled manner, fly ash can cause significant ecosystem pollution through the leaching of heavy metals and the generation of dust; however, when recovered and utilized—particularly in the construction sector—it provides substantial environmental benefits by reducing carbon emissions.

​

Environmental Impacts (In the Case of Recovery)

Reducing the Carbon Footprint: When used as a substitute for clinker in cement production, it significantly lowers both the high energy consumption required for clinker manufacturing and the volume of carbon dioxide (CO₂) released into the atmosphere. Conservation of Natural Resources: Utilizing these materials in concrete and road construction reduces the consumption of raw material sources such as limestone, clay, and natural aggregates.

Stabilization of Heavy Metals: When trapped within a concrete matrix, the heavy metals present are chemically bound, eliminating the risk of them leaching into the environment.

  •  
Yüksek Fırın Cürufu

Yüksek Fırın Cürufu

Yüksek Fırın Cürufu

BLAST FURNACE SLAG

Blast furnace slag is a mineral-based by-product generated at high temperatures during the production of pig iron in iron and steel plants. Extracted from the furnace in a molten state (at approximately 1500–1600 °C), this waste material is rapidly cooled—using either water or air—to form granules, which are subsequently ground to the fineness of cement. When utilized in the production of cement and concrete, blast furnace slag (BFS) serves as an eco-friendly by-product that reduces carbon emissions, repurposes industrial waste, and extends the service life of structures.

​

Key Characteristics and Advantages

Pozzolanic Structure: It contains high levels of silica and alumina. When mixed with cement or added to concrete, it enhances strength.

Strength Development: While its early-age strength is slightly lower than that of ordinary Portland cement, its long-term strength (at 28 days and beyond) is significantly higher.

Environmental Impact: By reducing the required amount of cement, it lowers carbon (CO₂) emissions, making it a preferred choice for "green building" concepts.

Chemical Resistance: It imparts high impermeability and durability to concrete, providing resistance against harsh environmental conditions such as exposure to seawater, sulfates, and abrasion.

Low Heat of Hydration: It reduces the heat of hydration, thereby lowering the risk of thermal cracking in mass concrete structures.

​

Applications

Cement Production: It serves as a primary component in CEM III-class blast furnace slag cements, in accordance with the TS EN 197-1 standard.

Concrete Admixture: It is added to ready-mix concrete as a mineral admixture. Specialized Structures: Widely used in coastal and port construction, offshore structures, dams, wastewater treatment facilities, and industrial concrete flooring.

Infrastructure: In its unground or granular form, it is utilized as a sub-base or fill material in road construction.

 

Positive Environmental Impacts

Reduces CO₂ emissions: Lowers the demand for cement and clinker, thereby decreasing carbon and harmful gas emissions associated with production.

Prevents waste accumulation: Transforms a by-product of iron and steel production into a raw material, rather than allowing it to accumulate in landfills.

Conserves energy and natural resources: Reduces the high thermal energy required for clinker production and lowers the consumption of natural raw materials.

Enhances structural durability: Increases the impermeability of concrete, improving its resistance to environmental factors such as sulfates, seawater, and freeze-thaw cycles; this results in longer-lasting structures that require less maintenance and repair.

Ground granulated blast-furnace slag (GGBFS) is a strategic by-product in the cement and concrete industry that lowers carbon-related costs, improves EPD (Environmental Product Declaration) performance, and earns additional points for green building certifications.

 

1. Carbon Footprint and Climate Legislation (CBAM & ETS)

Reduction of embodied emissions: Under the EU’s Carbon Border Adjustment Mechanism (CBAM) and Turkey’s Emissions Trading System (ETS), the cement sector is subject to direct carbon pricing. Using GGBFS as a substitute for clinker directly reduces the embodied CO₂ emissions per ton of product, providing advantages in terms of taxes and carbon-related costs. Life Cycle Assessment (LCA) and EPD: In EPD (Environmental Product Declaration) documents—which provide transparency for construction materials—and in ISO 14067 product carbon footprint calculations, the use of Ground Granulated Blast-Furnace Slag (GGBFS) significantly lowers the Global Warming Potential (GWP) of concrete, as it is classified as an industrial by-product.

2. Green Building Certification Criteria (LEED, BREEAM, YeS-TR)

Materials and Resources (MR) Credits: In LEED and BREEAM systems, using materials that contain recycled content or by-products, as well as selecting products with EPDs, directly contributes to earning points.

Whole-Building Life Cycle Impact Reduction: Modern green building standards require a 10%–20% reduction in a structure’s total embodied carbon compared to a standard reference building; concrete containing high proportions of GGBFS (such as CEM III-type cement) offers the most practical means of achieving this target.

Regional Sourcing Advantage: Utilizing GGBFS produced near iron and steel plants reduces transport-related emissions, thereby supporting the "local materials" criteria within green building frameworks.

3. Compliance with Environmental and Product Regulations

Waste Management and By-product Status: Within the scope of "Zero Waste" and circular economy regulations, GGBFS is diverted from being sent to landfills as waste and is instead integrated into the economy as a raw material substitute.

Technical Standards and CE Marking: The placing of GGBFS on the market as a construction material is governed by the Construction Products Regulation (EU 305/2011) and the TS EN 15167-1 standard. These standards ensure the chemical composition, heavy metal limits, and environmental safety of the slag.

  •  
Silis Dumanı

Silis Dumanı

Silis Dumanı

SILICA FUME

Silica fume (also known as microsilica) is a very fine, amorphous silicon dioxide (SiO₂) powder obtained by condensing the gases emitted from electric arc furnaces during the production of silicon metal and ferrosilicon alloys. It is primarily used in concrete technology as a mineral admixture (pozzolan) to enhance strength and impermeability.

 

Key Physical and Chemical Properties

The primary characteristics that distinguish silica fume from standard binders are its extremely small particle size and high pozzolanic activity.

Particle size. Its spherical particles, which have an average diameter of 0.15 micrometers (µm), are approximately 100 times smaller than those of standard Portland cement.

Chemical composition. It consists of 85% to 98% amorphous silicon dioxide (SiO₂).

Specific surface area. Due to its very fine-grained structure, it possesses a very large surface area, typically ranging between 15,000 and 30,000 m²/kg.

Density. Its relative density is approximately 2.2–2.3 g/cm³. Its bulk density is 130 kg/m³ in its undensified form, while it can reach up to 600 kg/m³ in its densified form. Advantages for Concrete and Structures

It reacts with calcium hydroxide (Ca(OH)₂)—a byproduct of the reaction between cement and water—to produce additional C-S-H (calcium silicate hydrate) gel.

​

High compressive strength. By filling the interfacial voids between the aggregate and the cement paste, it significantly enhances the mechanical strength of the concrete.

Maximum impermeability. It clogs the capillary pores within the concrete, potentially reducing the penetration of water and harmful chemicals by up to 100 times.

Corrosion and chemical resistance. It prevents the corrosion of reinforcement steel by inhibiting the penetration of chloride ions and the effects of sulfates.

Abrasion resistance. It extends the service life of surfaces subjected to intense friction, such as industrial flooring and dam spillways.

Efficiency in shotcrete. It improves adhesion to the substrate, reducing rebound loss by approximately 50%.

​

Areas of Application and Considerations

Silica fume is widely preferred for engineering structures exposed to harsh environmental conditions, as well as for specialized industrial mortars.

​

Primary areas of application. Key applications include high-rise buildings, bridges, marine structures, tunnels, shotcrete projects, prefabricated elements, and refractory (fire-resistant) materials.

Water demand and workability. Due to its very large surface area, it increases the water demand of the mix, which may reduce the workability of the concrete. To counterbalance this effect, superplasticizing chemical admixtures must be incorporated into the mix.

Dosage and safety. It is typically used at a dosage of 5% to 10% of the cement weight. As it is an extremely fine powder, a dust mask and protective eyewear should be worn during handling to prevent inhalation.

​

Since silica fume is obtained by recovering an industrial waste product (by-product), it serves as a sustainable material that significantly reduces the carbon footprint when used in concrete; however, if not managed properly during production and application, it can lead to air and water pollution.

Its environmental impact should be examined from two perspectives: its positive contributions and the risks that require careful attention.

​

Positive Environmental Impacts (Sustainability)

Silica fume stands as one of the most successful examples of the circular economy within the construction sector.

Industrial waste disposal. Capturing this ultra-fine powder—which would otherwise be emitted from the chimneys of silicon and ferrosilicon plants and end up occupying space in landfills—and utilizing it in construction eliminates the burden on landfill sites.

Reduction of carbon (CO₂) emissions. The production of Portland cement is highly energy-intensive and represents a significant source of global carbon emissions. Substituting a portion of the cement in concrete with silica fume directly lowers the CO₂ emissions associated with cement production.

Extended structural lifespan. By enhancing the impermeability and corrosion resistance of concrete, it extends the service life of structures such as bridges, tunnels, and marine facilities. The resulting need for less maintenance, repair, and demolition leads to long-term savings in raw materials and energy. Reduction of cross-sections (material savings). By providing very high compressive strength, it allows for the design of slimmer load-bearing elements (columns, beams, etc.), which in turn reduces the total consumption of aggregates, water, and cement.

  •  
Kalsit

Kalsit

Kalsit

CALCITE

With the chemical formula CaCO₃ (calcium carbonate), calcite is one of the most abundant carbonate minerals found in nature. It serves as the primary component of rocks such as limestone, marble, and travertine. It is utilized in the production of cement, plaster, joint fillers, putties, and adhesives.

​

Benefits for Concrete

Void Filling and Density. Finely ground calcite particles fill the micro-voids between cement and aggregates, resulting in a denser and less permeable concrete matrix.

Workability and Fluidity. It improves the consistency of fresh concrete, enhances pumpability, and reduces the risks of segregation and bleeding.

Early-Age Strength. By acting as a nucleation site during cement hydration, it accelerates the development of early-age strength in concrete.

Water Impermeability and Resistance to External Factors. By reducing capillary voids, it hinders the penetration of water, harmful chemicals, and the effects of freeze-thaw cycles; it also delays the corrosion of reinforcement steel.

Cost Efficiency and Cement Savings. When used as a partial replacement for cement, it lowers raw material costs and helps reduce the carbon footprint.

As a versatile, eco-friendly additive in construction materials, calcite helps lower carbon emissions, mitigate pollution, and conserve natural resources when used as a cement substitute. Since it is produced through mechanical grinding rather than processes requiring high heat, its ecological footprint is remarkably low. Environmental Contributions in the Construction and Manufacturing Sector

Reducing Carbon Emissions. The clinker production phase in cement manufacturing is highly energy-intensive and results in significant carbon dioxide (CO₂) emissions. Replacing a portion of the clinker in concrete with micronized calcite directly lowers both total CO₂ emissions and energy consumption.

A Natural and Non-Toxic Building Material. As an inert (non-reactive) mineral that is abundant in nature and free from heavy metals or harmful chemicals, it does not release toxic gases into the environment—neither during application nor throughout the entire lifespan of the structure—posing no risk to human health.

  •  
bottom of page