
Geopolymer Concrete
Geopolymer concrete is a new generation of construction material produced by using industrial by-products (such as fly ash and blast furnace slag) and other aggregates—instead of traditional components like Portland cement, lime, and sand—in combination with alkaline activators.
This type of concrete stands out for being environmentally friendly and offering high-performance characteristics.

Geopolymer Concrete
Geopolymer concrete is produced by binding materials such as fly ash and slag with alkaline activators. While the production of Portland cement leads to significant carbon dioxide emissions, geopolymer concrete offers the potential to reduce production-related emissions by decreasing the use of cement.
During production, the materials are mixed and poured into molds; they are then cured—either at room temperature or under controlled heat, depending on the specific mixture. The duration and temperature of the curing process influence the strength development of the concrete.
With an appropriate mix design, geopolymer concrete can achieve high compressive strength. Furthermore, its tensile and flexural strength may also be higher than that of conventional concrete. These properties vary based on the raw materials used and the production conditions.


Green Concrete
Green concrete is a type of concrete that aims to use fewer natural resources and less cement in its production, while incorporating industrial by-products to reduce environmental impact. Materials such as fly ash and slag can be used to replace a portion of the cement, thereby helping to lower carbon emissions associated with the production of Portland cement.
The composition, strength, and curing conditions of green concrete are determined based on its intended use. When designed correctly, it can deliver performance that exceeds the strength and functional characteristics of conventional concrete.
The Differences between traditional concrete
Environmental Impact: Traditional concrete production results in high carbon dioxide emissions. In contrast, geopolymer concrete is eco-friendly, as it is produced through the transformation of industrial by-products.
Compressive Strength: The compressive strength of traditional aerated concrete products typically ranges from 2–4 MPa. GC GazBlok, however, achieves a compressive strength of 3–5 MPa, offering a clear advantage over conventional aerated concrete. While standard concrete made with Portland cement generally has a compressive strength of 20–40 MPa, geopolymer concrete—thanks to its specialized formulation—can exceed even these values.
Thermal Conductivity: Geopolymer aerated blocks are notable for their low thermal conductivity. Whereas traditional aerated concrete has a thermal conductivity of approximately 0.10–0.15 W/mK, GC GazBlok reduces this figure to 0.066–0.09 W/mK, thereby enhancing energy efficiency.
Sound Insulation: Due to its porous structure, the geopolymer aerated block is highly effective at providing sound insulation. This characteristic makes it an ideal choice for those seeking to create comfortable, quiet living spaces.
